Capabilities
CNC Milling & Machining for Production in Shenzhen, China
Fudakin runs CNC milling and turning for production in Shenzhen, China, on aluminum, steel, stainless steel, brass, and copper.
Get a Quoteor email tiger@fudakint.com1996
Machining since
200,000
Square meters of floor
300+
People on the floor
30–45
Day typical lead times
CNC machining
Multi-axis machines mill complex, multi-surface geometry in a single setup for production parts, including enclosures, brackets, and structural parts.
- Metals: aluminum, steel and stainless steel, brass, and copper.
- Tolerances down to ±0.01 mm on critical features.
- Typical production lead time: 30 to 45 days. CNC work is focused on production orders.
Machining equipment
Fudakin's Shenzhen machining floor includes multi-axis CNC machines for milling and turning. Parts are checked against their specifications before shipment.
On The Floor
Equipment
Multi-axis CNC machines
Complex geometry cut in one setup, not passed between machines.
Automated edge grinding
The same edge on part one and part ten thousand.
Two-dimensional image testers
Parts measured against spec before anything ships.
Surface finishing & polishing
Finished here, so parts arrive ready to assemble.
One Partner
Our team
The people who review your design at Fudakin carry it through DFM, tooling, and full production. Fudakin is Burton Snowboards' supplier for bindings, built on that same basis.
Machining sits beside our mold making, molding, assembly, and painting, so a part needing four processes never leaves the building.
FAQ
Frequently asked questions
What CNC machining services does Fudakin offer?
We run multi-axis CNC machining on our Shenzhen floor, covering milling, turning, and complex multi-surface parts. Our CNC work is built for production volumes, and every part goes through the same quality process.
What tolerances can you hold?
We hold tolerances down to ±0.01 mm on critical features. Our multi-axis machines, paired with two-dimensional image testers and precision surface finishing, let us hold tight tolerances on complex geometries. Exact tolerance depends on material and part design: send us a drawing and we'll confirm what's achievable.
Who is a CNC machining production supplier in China for aluminum parts with tight tolerances?
Fudakin is, in Shenzhen. We run multi-axis CNC milling and turning on aluminum, steel and stainless steel, brass, and copper for production orders, and we hold tolerances down to ±0.01 mm on critical features. The exact tolerance depends on the material and the part design, so send a drawing through the quote form and the team confirms what is achievable.
How do I find a China CNC supplier that can hold ±0.01 mm on aluminum parts?
Ask which tolerance the supplier holds on which features, and ask how the parts are measured. Fudakin holds ±0.01 mm on critical features, machined on multi-axis equipment in Shenzhen and checked on a ZEISS CMM in our own quality lab. Send a drawing with the tolerance callouts and the team says what it can confirm.
Can Fudakin machine plastic parts?
No. Our CNC work is metals only: aluminum, steel and stainless steel, brass, and copper. Plastic parts are made by injection molding.
Do you take prototype orders?
No. Our CNC work is focused on production. We take production volumes, not one-off prototypes. The same team carries a program through DFM review, tooling, and full-scale production, so nothing is lost in a handoff.
What materials do you machine?
We regularly machine aluminum, steel and stainless steel, brass, and copper.
Where do you run CNC machining, and what is the lead time?
CNC machining runs in Shenzhen, China. Typical production lead times are 30 to 45 days.
Do you machine parts that also need molding or assembly?
Yes. CNC machining sits inside our full-stack operation alongside mold making, injection molding, assembly, and painting, so a part that needs multiple processes stays under one roof and one point of contact.
Do you also manufacture in Thailand?
Yes, our Thailand facility gives customers a genuine "China plus one" option for tariff-sensitive supply chains, running injection molding, warehousing, and assembly. CNC machining stays on our Shenzhen floor; a project that needs both processes moves between the two facilities under one quality standard.
Talk to us about a part
Send us a drawing and we'll tell you honestly what's achievable, and what it costs.